ELECTROMAGNETIC TRANSFORMER Pg Up
 
 
Dimensions
Lenght: 247mm
Width: 145mm
Height: 80mm
 
Independent transformers
- For low-voltage halogen incandescent lamps
- The shell is made by aluminum alloy with powder coating.
- Built-in recoverable thermal protector.
- Insulation class B
- Max ambient temperature 40
- Protection of electric attack class II
- IP Rating: IP40
Code
Model
Watt
Voltage(pri/sec)
( V )
Ta
(C)
Net weight
(Kg)
TE A430
EW-500A
300W
230/11.5
40
3.72
TE A440
EW-500A
400W
230/11.5
40
4.52
TE A450
EW-500A
500W
230/11.5
40
4.92
 
 
50W
Dimensions
Lenght: 205mm
Width: 53mm
Height: 44mm
 
60W
Dimensions
Lenght: 225mm
Width: 53mm
Height: 44mm
 
Independent transformers
- For low-voltage halogen incandescent lamps
- The shell is made form thermoplastic material
- Built-in recoverable thermal protector.
- Insulation class B
- The maximum ambient temperature is 40
- With overload protection,short circuit protection
- Automatic reset
Code
Model
Watt
Voltage(pri/sec)
( V )
Ta
(C)
Net weight
(Kg)
TE A550
EW-600A
50W
230/11.5
40
1.02
TE A560
EW-600A
60W
230/11.5
40
1.22
 
 
Multi-purpose terminal box of six holes character
- Code: TE A666
- Model: EW-06A
- The shell and terminals are made from die casting thermoplastic material.
- Tie-in with rubber ring formed extrusion waterproof seal.
- Equipped with 5 groups of double-ended terminals inside of block for lead connection.
- IP Rating: IP68
- Diameter range of the wire: 6.5mm -11mm
  Instruction
1,screwing off the cover and open it.
2,After loosening the caps of terminals upon the numbers and direction of wiring,take out the watertight blocks.
3,Putting the cable through waterproof terminals into box,connect the wires by terminals upon demand.
4,Tightening the caps of terminals.
5,Screwing down the cover finally.
6,Six holes for connecting can satisfy customer's personal needs.