| T8 Electronic
ballast BT8-C 18W/36W/58W/2x18w/2x36W/2x58W |
| Definition |
| Compact,lightweight high-frequency electronic standard ballasts
for T8 fluorescent lamps |
| Description |
| - programmed start:ficker-free warm start,ideal for areas
with high switching frequency. |
| - 50% longer lamp life than with conventional ballasts |
| - Up to 25% reduction in energy consumption at constant luminous
flux compared with |
| conventional gear. |
| - Constant light independent of mains voltage fluctustions |
| - Unit is protected against excessive mains voltages and incorrect
connections. |
| - Automatic stop circuit is activated within five seconds
in case of lamp failure(safety |
| stop): once the lamp has been replaced, the ballast resets
autonatically. |
| - Equipped with terminations suitable for automatic wiring
machines. |
| Technical data for installation |
| Mains operation |
| Rated mains voltage 220-240V |
| with tolerances for safety: +/-10% 198-264V |
| tolerances for performance: +6%-8% 202-254V |
| Mains frequency 50/60Hz |
| Operating frequency 40-45KHz |
| power factor >0.98 typical |
| TC 95% |
| Luminous coefficient 95% |
| Total harmonic distortion TDH <10% |
| Lamp current wave crest ratio <1.5 |
| Applications |
| Typical areas of application include: |
| - Department stores,shops,supermarkets |
| - Installations with infrared remote control systems |
| - Airports,railway stations |
| - Office buildings,for example,insurance companies,banks,government
ministries |
| - Hospitals |
| - Hotels |
| - Industrial premises |
